High-temperature and high strain rates uniaxial tension tests for thermoset based structural adhesive Henkel Teroson EP5089
The attached data contains the stress-strain curves obtained by the uniaxial tension test performed on Henkel Teroson EP5089. The tests were performed at a range of temperature (20C to 120C) and varying strain rates (SR0.0001 to SR0.1).
AGHA, AKSHAT (2021), "High-temperature and high strain rates uniaxial tension tests for thermoset based structural adhesive Henkel Teroson EP5089", Mendeley Data, doi: 10.17632/rrcbysz6b9.1
The tests were performed on the attached custom geometry. The samples were cured and sheared into the dogbone specimens using a special die. The tests were performed on an Instron load frame with the custom grips inside a furnace, and the strains were measured optically using a GOM Aramis 3D DIC system.