Submissions from 2023
On the Measurement of Nakazima Testing Based Out-of-Plane Forming Limit Curves using 2D Digital Image Correlation, Akshat Agha and Fadi Abu-Farha
COMPOSITES 4.0: ENABLING THE MODERNIZATION OF LEGACY MANUFACTURING ASSETS IN SOUTH CAROLINA, Amit Makarand Deshpande, Gayatri Keskar, Sai Aditya Pradeep, Saeed Farahani, and Srikanth Pilla
Thermoplastics Foams: An Automotive Perspective, Sai Aditya Pradeep, Srishti Shukla, Nathaniel Brown, and Srikanth Pilla
Submissions from 2022
Effectiveness of 2D Digital Image Correlation in Capturing the Fracture Behavior of Sheet Metal Alloys, Akshat Agha
Advanced Anti-Buckling Device Coupled with Real-Time Digital Image Correlation for Complex Cyclic Tension-Compression Testing of Lightweight Materials, Akshat Agha and Fadi Abu-Farha
Numerical Implementation and Validation of a Viscoelastic-Plastic Material Model for Predicting Curing Induced Residual Stresses in Adhesive Bonded Joints, Akshat Agha and Fadi Abu-Farha
Design and Development of a Multi-material, Cost-competitive, Lightweight Mid-size Sports Utility Vehicle’s Body-in-White, Amit M. Deshpande, Rushabh Rajesh Sadiwala, Nathan Brown, Sai Aditya Pradeep, Leon M. Headings, Ningxiner Zhao, Brad Losey, Ryan Hahnlen, Marcelo J. Dapino, Gang Li, and Srikanth Pilla
Submissions from 2021
Experimental Methods to Capture Curing Induced Effects in Adhesive Bonded Joints, Akshat Agha and Fadi Abu-Farha
Viscoelastic Model to Capture Residual Stresses in Heat Cured Dissimilar Adhesive Bonded Joints, Akshat Agha and Fadi Abu-Farha
Submissions from 2020
Integration Concept of Injection, Forming and Foaming: A Practical Approach to Manufacture Hybrid Structures, Saeed Farahani, Sai Aditya Pradeep, and Srikanth Pilla
Submissions from 2018
Cure History Dependent Viscoelastic Modeling of Adhesively Bonded Joints using MAT_277 in LS-DYNA®, Akshat Agha, Fadi Abu-Farha, Rakan Alturk, Tim Welters, and Georges Romanos
State of the Art Review on Process, System, and Operations Control in Modern Manufacturing, Dragan Djurdjanovic, Laine Mears, Farbod Akhavan Niaki, Asad Ul Haq, and Lin Li
A complementary Cyber-Human Systems framework for Industry 4.0 Cyber-Physical Systems, Matthew Krugh and Laine Mears
Submissions from 2017
Process and Operations Control in Modern Manufacturing, Dragan Djurdjanovic, Laine Mears, Farbod Akhavan Niaki, Asad Ul Haq, and Lin Li
Nonlinear Parameter Estimation in a Typical Industrial Air Handler Unit, Lujia Feng, Pierluigi Pisu, Laine Mears, and Jörg Schulte
Electrically Assisted Drilling of Usibor 1500 Boron Steel and its Implications for Electrically Assisted Machining, Nived Govind Karumatt, Brandt J. Ruszkiewicz, and Laine Mears
Measurement of Operator-machine Interaction on a Chaku-chaku Assembly Line, Matthew Krugh, Ethan McGee, Stephen McGee, Laine Mears, Andrej Ivanco, K. C. Podd, and Barbara Watkins
Measurement of Operator-machine Interaction on a Chaku-chaku Assembly Line, Matthew Krugh, Ethan McGee, Stephen McGee, Laine Mears, Andrej Ivanco, K. C. Podd, and Barbara Watkins
High performance computing simulations to identify process parameter designs for profitable titanium machining, Mathew Kuttolamadom, Joshua Jones, Laine Mears, James Von Oehsen, Thomas Kurfess, and John Ziegert
Designing for Reuse in an Industrial Internet of Things Monitoring Application, Ethan T. McGee, Matthew Krugh, John D. McGregor, and Laine Mears
Mechanistic force model for machining process—theory and application of Bayesian inference, Parikshit Mehta, Mathew Kuttolamadom, and Laine Mears
Investigation of Chip Thickness and Force Modelling of Trochoidal Milling, Abram Pleta, Farbod Akhavan Niaki, and Laine Mears
Investigation of Chip Thickness and Force Modelling of Trochoidal Milling, Abram Pleta, Farbod Akhavan Niaki, and Laine Mears
A Review of Electrically-Assisted Manufacturing With Emphasis on Modeling and Understanding of the Electroplastic Effect, Brandt J. Ruszkiewicz, Tyler Grimm, Ihab Ragai, Laine Mears, and John T. Roth
An Investigation of Electroplastic Drilling of Mild Steel, Brandt J. Ruszkiewicz, Farbod Akhavan Niaki, Laine Mears, and Elizabeth Gendreau
Investigation of the Cleaning and Welding Steps From the Friction Element Welding Process, Jamie D. Skovron, Brandt J. Ruszkiewicz, Laine Mears, Tim Abke, Ankit Varma, Yuxin Li, Hongseok Choi, and Xin Zhao
Submissions from 2016
Energy Consumption Modeling and Analyses in Automotive Manufacturing Plant, Lujia Feng and Laine Mears
Energy, economy, and environment analysis and optimization on manufacturing plant energy supply system, Lujia Feng, Laine Mears, Cleveland Beaufort, and Joerg Schulte
Energy Demand Forecasting in an Automotive Manufacturing Plant, Lujia Feng, Laine Mears, and Joerg Schulte
Key Variable Analysis and Identification of Energy Consumption in an Automotive Manufacturing Plant, Lujia Feng, Laine Mears, and Jörg Schulte
Cost Estimation Model for PAN Based Carbon Fiber Manufacturing Process, Amaninder Singh Gill, Darian Visotsky, Laine Mears, and Joshua D. Summers
Cost Estimation Model for Polyacrylonitrile-Based Carbon Fiber Manufacturing Process, Amaninder Singh Gill, Darian Visotsky, Laine Mears, and Joshua D. Summers
Springback Evaluation of 304 Stainless Steel in an Electrically Assisted Air Bending Operation, Abdelrahim Khal, Brandt J. Ruszkiewicz, and Laine Mears
Prediction of Defect Propensity for the Manual Assembly of Automotive Electrical Connectors, Matthew Krugh, Kavit Antani, Laine Mears, and Jörg Schulte
Prediction of Defect Propensity for the Manual Assembly of Automotive Electrical Connectors, Matthew Krugh, Kavit Antani, Laine Mears, and Jörg Schulte
Statistical Modeling of Defect Propensity in Manual Assembly as Applied to Automotive Electrical Connectors, Matthew Krugh, Kavit Antani, Laine Mears, and Jörg Schulte
A wavelet-based data-driven modelling for tool wear assessment of difficult to machine materials, Farbod Akhavan Niaki, Lujia Feng, Durul Ulutan, and Laine Mears
Extended Kalman Filter for Stochastic Tool Wear Assessment in Turning of INC718 Hard-to-Machine Alloy, Farbod Akhavan Niaki, Martin Michel, and Laine Mears
State of health monitoring in machining: Extended Kalman filter for tool wear assessment in turning of IN718 hard-to-machine alloy, Farbod Akhavan Niaki, Martin Michel, and Laine Mears
Parameter Inference Under Uncertainty in End-Milling γ′-Strengthened Difficult-to-Machine Alloy, Farbod Akhavan Niaki, Durul Ulutan, and Laine Mears
Evaluating the Use of Artificial Neural Networks, Graph Theory, and Complexity Theory to Predict Automotive Assembly Defects, Apurva Patel, Patrick Andrews, Joshua D. Summers, Erin Harrison, Joerg Schulte, and Laine Mears
Cutting Force Investigation of Trochoidal Milling in Nickel-Based Superalloy, Abram Pleta and Laine Mears
Cutting Force Investigation of Trochoidal Milling in Nickel-based Superalloy, Abram Pleta and Laine Mears
Trust-based compliant robot-human handovers of payloads in collaborative assembly in flexible manufacturing, S.M. Mizanoor Rahman, Yue Wang, Ian D. Walker, Laine Mears, Richard Pak, and Sekou Remy
Temperature-Controlled Forming of 7075-T6 Aluminum Using Linearly Decaying Direct Electric Current, Brandt J. Ruszkiewicz and Laine Mears
Obstacle Filtering Alogrithm for Control of an Autonomous Road Vehicle in Public Highway Traffic, Qian Wang and Beshah Ayalew
Submissions from 2015
Investigations in subsurface damage when machining γ′-strengthened nickel-based superalloy, Yujie Chen, Cristina Bunget, Laine Mears, and Thomas R. Kurfess
Energy consumption modeling and analyses in automotive manufacturing final assembly process, Lujia Feng, Durul Ulutan, and Laine Mears
Correlation of the Volumetric Tool Wear Rate of Carbide Milling Inserts With the Material Removal Rate of Ti–6Al–4V, Mathew Kuttolamadom, Parikshit Mehta, Laine Mears, and Thomas Kurfess
Adaptive control for multistage machining process scenario—bar turning with varying material properties, Parikshit Mehta and Laine Mears
Superalloy Machining Tool Wear: State Estimation and Alternative Path Planning for Mitigation, Farbod Akhavan Niaki, Abram Pleta, and Laine Mears
In-process Tool Flank Wear Estimation in Machining Gamma-prime Strengthened Alloys Using Kalman Filter, Farbod Akhavan Niaki, Durul Ulutan, and Laine Mears
Stochastic tool wear assessment in milling difficult to machine alloys, Farbod Akhavan Niaki, Durul Ulutan, and Laine Mears
An Investigation of Alternative Path Planning Strategies for Machining of Nickel-Based Superalloys, Abram Pleta, Durul Ulutan, and Laine Mears
Effect of Thermal Assistance on the Joint Quality of Al6063-T5A During Flow Drill Screwdriving, Jamie D. Skovron, R. Rohan Prasad, Durul Ulutan, Laine Mears, Duane Detwiler, Daniel Paolini, Boris Baeumler, and Laurence Claus
Comparison and Cost Optimization of Solid Tool Life in End Milling Nickel-Based Superalloy, Durul Ulutan, Abram Pleta, Andy Henderson, and Laine Mears
Submissions from 2014
The Correlation of the Volumetric Wear Rate of Turning Tool Inserts With Carbide Grain Sizes, Mathew A. Kuttolamadom, Laine Mears, and Thomas R. Kurfess
Finding Maximum Subsets of Relational Objects using SAT Decomposition, Bryan Pearce, Mary E. Kurz, Kavit Antani, and Laine Mears
Characterization of Flow Drill Screwdriving Process Parameters on Joint Quality, Jamie Skovron, Laine Mears, Durul Ulutan, Duane Detwiler, Daniel Paolini, Boris Baeumler, and Laurence Claus
Empirical Modeling of Residual Stress Profile in Machining Nickel-based Superalloys Using the Sinusoidal Decay Function, D. Ulutan, Y. M. Arisoy, T. Ozel, and Laine Mears
Submissions from 2013
Thermomechanical modeling sensitivity analysis of electrically assisted forming, Cristina J. Bunget, Wesley A. Salandro, and Laine Mears
Alternative Control of an Electrically Assisted Tensile Forming Process Using Current Modulation, Joshua J. Jones and Laine Mears
Thermal Response Modeling of Sheet Metals in Uniaxial Tension During Electrically-Assisted Forming, Joshua J. Jones and Laine Mears
Design of an Apparatus to Detect Small Changes in the Mass of Rotational Machine Components, Jonathan R.A. Maier, M. Laine Mears, and Joshua D. Summers
Direct Sinter Bonding of Metal Injection-Molded Parts to Solid Substrate Through Use of Deformable Surface Microfeatures, Thomas Martens and Laine Mears
Condition based maintenance-systems integration and intelligence using Bayesian classification and sensor fusion, Parikshit Mehta, Andrew Werner, and Laine Mears
Submissions from 2012
Electrically-Assisted Forming of Magnesium AZ31: Effect of Current Magnitude and Deformation Rate on Forgeability, Joshua J. Jones, Laine Mears, and John T. Roth
Life-Cycle Integration of Titanium Alloys into the Automotive Segment for Vehicle Light-Weighting: Part I - Component Redesign, Prototyping, and Validation, Joshua Jones, Mathew Kuttolamadom, Laine Mears, Thomas Kurfess, and Kilian Funk
On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex Geometries—Part 1: Need, Methodology, and Standardization, Mathew A. Kuttolamadom, Laine Mears, and Thomas R. Kurfess
On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex Geometries—Part II: Experimental Investigation and Validation on Ti-6Al-4V, Mathew A. Kuttolamadom, Laine Mears, Thomas R. Kurfess, Uli Burger, and April Bryan
Life-Cycle Integration of Titanium Alloys into the Automotive Segment for Vehicle Light-Weighting: Part II - Component Life-Cycle Modeling and Cost Justification, Mathew Kuttolamadom, Joshua Jones, Laine Mears, Thomas Kurfess, and Kilian Funk
Manufacturing Process Modeling and Application to Intelligent Control, M. Laine Mears, Parakshit Mehta, Mathew Kuttolamadom, Carlos Montes, Joshua Jones, Wesley Salandro, and Drew Werner
Vision-based tracking of a dynamic target with application to multi-axis position control, Carlos A. Montes, Chan Wong, John C. Ziegert, and Laine Mears
Vision-based tracking of a dynamic target with application to multi-axis position control, Carlos A. Montes, Chan Wong, John C. Ziegert, and Laine Mears
Mobile Devices Within Manufacturing Environments: A BMW Applicability Study, Beshoy Morkos, Torsten Rilka, Joachim Taiber, Joshua D. Summers, Laine Mears, and Georges Fadel
A thermal-based approach for determining electroplastic characteristics, Wesley A. Salandro, Cristina J. Bunget, and Laine Mears
Submissions from 2011
Evaluation of lubricants for electrically-assisted forming, C. Bunget, W. A. Salandro, and Laine Mears
Injection Mold Process Optimization for Surface Microfeature Control, Manjesh Dubey, Laine Mears, Andrew Cannon, and Ralph Hulseman
Use of Fused Deposition Modeling of Polyphenylsulfone for Centrifugal Casting of Polyurethane: Material, Surface, and Process Considerations, Thomas Martens, Monty Graham, Laine Mears, Mike Dotson, and Phillip Sanger
Automotive engineering curriculum development: case study for Clemson University, Laine Mears, Mohammed Omar, and Thomas R. Kurfess
Hybrid Command Issuing in a 2-Dof Servomechanism Operated Under Vision-Based Feedback Control, C. Montes, C. Wong, and J. Ziegert
Organizational learning in automotive manufacturing: a strategic choice, M. Omar, Laine Mears, T. Kurfess, and R. Kiggans
Several Factors Affecting the Electroplastic Effect During an Electrically-Assisted Forming Process, Wesley A. Salandro, Cristina J. Bunget, and Laine Mears
Electroplastic Modeling of Bending Stainless Steel Sheet Metal Using Energy Methods, Wesley A. Salandro, Cristina Bunget, and Laine Mears
Submissions from 2010
Empirical Modeling of the Stress-strain Relationship for an Upsetting Process under Direct Electrical Current, Joshua Jones, Laine Mears, and J. T. Roth
Effect of Machining Feed on Surface Roughness in Cutting 6061 Aluminum, Mathew Kuttolamadom, Sina Hamzehlouia, and Laine Mears
Motivating Industrial Engineering Students: The Effects of Authentic Learning Experience, Gender and Class Standing, Danielle McDonnell, Maria E. Mayorga, Lisa C. Benson, and Laine Mears
Motivating Industrial Engineering Students: The Effects of Authentic Learning Experience, Gender and Class Standing, Danielle McDonnell, Marla E. Mayorga, Lisa C. Benson, and Laine Mears
Assigning Storage Locations in an Automated Warehouse, Mark H. McElreath, Maria E. Mayorga, and Laine Mears
Investigation of the Machining of Titanium Components for Lightweight Vehicles, Laine Mears, Mathew A. Kuttolamadom, Joshua J. Jones, Thomas R. Kurfess, and Aditya S. Choragudi
2-D Absolute Positioning System for Real-Time Control Applicants, Carlos A. Montes, John C. Ziegert, Chan Wong, and Laine Mears
Quality and Inspection of Machining Operations: Tool Condition Monitoring, John T. Roth, Dragan Djurdjanovic, Xiaoping Yang, Laine Mears, and Thomas Kurfess
Model-Based Control to Enhance a Novel Two Dimensional Positioning System, Chan Yet Wong, Carlos Montes, Laine Mears, and John Ziegert
Submissions from 2009
Volumetric Flank Wear Characterization for Titanium Milling Insert Tools, Uli Burger, Mathew Kuttolamadom, April Bryan, Laine Mears, and Thomas Kurfess
WARNING! Engineers in Training: Introducing Middle School Students to Industrial Engineering, its Usefulness, and its Applications, M. Grubb, A. Berger, D. Browning, M. Mayorga, and Laine Mears
Quality and Inspection of Machining Operations: CMM Integration to the Machine Tool, Laine Mears, Thomas Kurfess, John T. Roth, Dragan Djurdjanovic, and Xiaoping Yang
Method to Measure Planar Displacement Using Centroid Calculation, Carlos A. Montes, Laine Mears, and John C. Ziegert
Submissions from 2008
Characterization of a Nano-Composite Sensor in Multiple Environmental Domains, Swathi Chimalapati, Laine Mears, and Andrew C. Clark
Selection of the spraying technologies for over-coating of metal-stampings with thermo-plastics for use in direct-adhesion polymer metal hybrid load-bearing components, M. Grujicic, V. Sellappan, Laine Mears, Norbert Seyr, Andreas Obieglo, Marc Erdmann, and Jochen Holzleitner
Open-Loop Velocity Planning to Mitigate the Stiction Effect in Pushing Positioning, Laine Mears and Thomas Kurfess